Order Products : sales@su-jiao.com

BJB Polyurethane PC-10

Category:	TSU , Polyurethane Thermoset Elastomer
Manufacturer:	BJB Enterprises, Inc.
Trademark:	BJB Polyurethane
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	B1iKUW_BJB-Polyurethane-PC-10.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PC-10 is set up as a three component liquid material system. When added in increased amounts, the "C" component takes the basic A/B mixture from the texture of an ordinary soft gumdrop to a jelly-like consistency. One of the most unusual, yet, important features of this product is that regardless of the consistency, PC-10 can bounce back to its original shape. The maximum amount of "C" that can be added is 200% to a total A/B mixture. This level of "C" produces a gel that has a sticky, pressure-sensitive adhesive type surface. This can be a desirable feature as it can keep the gel in place when it is used to fill a bladder or bag. PRODUCT HIGHLIGHTS: Resists moisture absorption and is moisture insensitive during handling Non-foaming Does not contain MOCA, MDA or TDI Non corrosive and compatible with electrical components Very easy to use Cures at room temperature

Message

PC-10 is set up as a three component liquid material system. When added in increased amounts, the "C" component takes the basic A/B mixture from the texture of an ordinary soft gumdrop to a jelly-like consistency. One of the most unusual, yet, important features of this product is that regardless of the consistency, PC-10 can bounce back to its original shape. The maximum amount of "C" that can be added is 200% to a total A/B mixture. This level of "C" produces a gel that has a sticky, pressure-sensitive adhesive type surface. This can be a desirable feature as it can keep the gel in place when it is used to fill a bladder or bag.

PRODUCT HIGHLIGHTS:

Resists moisture absorption and is moisture insensitive during handling

Non-foaming

Does not contain MOCA, MDA or TDI

Non corrosive and compatible with electrical components

Very easy to use

Cures at room temperature

General Information
Features	Good Adhesion Low Moisture Absorption Non-Corrosive
Uses	Adhesives
Forms	Liquid

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.948	g/cm³	ASTM D792
Molding Shrinkage - Flow	0.20	%

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	13 to 17		ASTM D2240

Thermoset	Nominal Value	Unit	Test Method
Thermoset Components
Part A	Mix Ratio by Weight: 50
Part B	Mix Ratio by Weight: 100
Shelf Life (25°C)	26	wk
Thermoset Mix Viscosity ¹(25°C)	150	cP	ASTM D2393
Demold Time ²(25°C)	180	min
Work Time ³(25°C)	5.0 to 10.0	min

Additional Information	Nominal Value	Unit	Test Method
Mixing Ratio - Part C	200.0	wt%
Water Resistance ⁴(25°C)	0.2	wt%

Note Message
1 .	A/B
2 .	A/B
3 .	A/B, 100g mass
4 .	30 days

Resin Grade	Manufacturer	Category	Trademark
Eltex® MED PH22D630	INEOS Olefins & Polymers Europe	LDPE	Eltex® MED
Latimass 47/7-04 D008	LATI S.p.A.	PP Copolymer	Latimass
LUVOCOM® 1-8981/LCF	Lehmann & Voss & Co.	Nylon 66	LUVOCOM®
OmniTech™ ABS 30	OMNI Plastics, LLC	ABS	OmniTech™
EVALENE® LLDPE LF10182	JG Summit Petrochemical Corporation	LLDPE	EVALENE® LLDPE