Order Products : sales@su-jiao.com
ShinkoLite-A S
| Category: | Acrylic (PMMA) , Polymethyl Methacrylate Acrylic |
| Manufacturer: | Mitsubishi Rayon America Inc. |
| Trademark: | ShinkoLite-A |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | B0thLR_ShinkoLite-A-S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ShinkoLite-A S is a Polymethyl Methacrylate Acrylic material. It is available in North America for casting. Important attributes of ShinkoLite-A S are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.30 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 100 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2940 | MPa | ASTM D638 |
| Tensile Strength (Break) | 74.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 4.5 | % | ASTM D638 |
| Flexural Modulus | 2940 | MPa | ASTM D790 |
| Flexural Strength (Break) | 103 | MPa | ASTM D790 |
| Compressive Modulus | 2940 | MPa | ASTM D695 |
| Compressive Strength | 123 | MPa | ASTM D695 |
| Shear Strength | 61.7 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 20 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 100 | °C | ASTM D648 |
| Continuous Use Temperature | 85.0 | °C | ASTM D794 |
| CLTE - Flow | 7.0E-5 | cm/cm/°C | ASTM D696 |
| Specific Heat | 1460 | J/kg/°C | ASTM C351 |
| Thermal Conductivity | 0.21 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+16 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 20 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 60 Hz | 4.00 | ||
| 1 kHz | 4.00 | ||
| 1 MHz | 3.00 | ||
| Dissipation Factor | ASTM D150 | ||
| 60 Hz | 0.060 | ||
| 1 kHz | 0.040 | ||
| 1 MHz | 0.020 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Refractive Index | 1.490 | ASTM D542 | |
| Transmittance | 93.0 | % | ASTM D1003 |
| Haze | 1.0 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TES J-50/30 BK223 | Techmer Engineered Solutions | PC | TES |
| ExxonMobil™ PP2252E4 | ExxonMobil Chemical | PP Homopolymer | ExxonMobil™ |
| Epolene® C-18 | Westlake Chemical Corporation | LDPE | Epolene® |
| Sylvin 9604-90 Grey 9163 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| ULTEM™ 1100 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
