TECHNYL® C 218 MT25 V15 BLACK Datasheet,Nylon 6,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® C 218 MT25 V15 Black is a polyamide 6, reinforced 25 % mineral filler and 15 % of glass fibre, heat stabilized, for injection moulding. This grade offers an excellent planarity of the end product, with good mechanical properties and good dimensional stability.

General Information
Filler / Reinforcement	Glass \mineral, 40% filler by weight
Additive	heat stabilizer
Features	Heat Stabilized - Inorganic Good dimensional stability Low warpage
Uses	Application in Automobile Field
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Injection molding
Resin ID (ISO 1043)	PA6-MD25+GF15

Physical	Dry	Conditioned	Unit	Test Method
Density	1.47	--	g/cm³	ISO 1183/A
Water Absorption (23°C, 24 hr)	0.50	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	9700	5500	MPa	ISO 527-2/1A
Tensile Stress (Break, 23°C)	125	70.0	MPa	ISO 527-2/1A
Tensile Strain (Break, 23°C)	2.5	--	%	ISO 527-2

Impact	Dry	Conditioned	Unit	Test Method
Notched Izod Impact (23°C)	4.2	--	kJ/m²	ISO 180

Thermal	Dry	Conditioned	Unit	Test Method
Melting Temperature	222	--	°C	ISO 11357-3

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	235 - 240	°C
Middle Temperature	240 - 250	°C
Front Temperature	250 - 260	°C
Mold Temperature	60 - 90	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C.

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C.

Resin Grade	Manufacturer	Category	Trademark
Sanren F800EPS (On-spec.)	SINOPEC Shanghai Petrochemical Co. Ltd.	PP Random Copolymer	Sanren
SuperLite® SL550700-100 (3.0mm)	Azdel, Inc.	PP, Unspecified	SuperLite®
NILENE® P10 K20T	Taro Plast S.p.A.	PP Homopolymer	NILENE®
Greenflex® FF 55 F	Versalis S.p.A.	EVA	Greenflex®
Latigray 47/1-01 CX/45	LATI S.p.A.	PP Copolymer	Latigray

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	B0qd9V_TECHNYLC218MT25V15BLACK.pdf
PRICE:	Order Products email sales@su-jiao.com