Order Products : sales@su-jiao.com
NORYL™ BN31 resin
| Category: | PPE+PS , Polyphenylene Ether + PS |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | NORYL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Aw72Fz_NORYL-BN31-resin.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Blowmoldable. Excellent processability and flammability. Good heat resistance. Low temperature impact strength. Dimensional stability. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.60 - 0.70 | % | Internal method |
| Outdoor Suitability | f1 | UL 746C |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 48.3 | MPa | ASTM D638 |
| Flexural Modulus 2(50.0 mm Span) | 2410 | MPa | ASTM D790 |
| Flexural Strength 3(Break, 50.0 mm Span) | 72.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C | 110 | J/m | ASTM D256 |
| 23°C | 270 | J/m | ASTM D256 |
| Dart Drop Impact | ASTM D3029 | ||
| -40°C | 33.9 | J | ASTM D3029 |
| 23°C | 13.6 | J | ASTM D3029 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.40 mm) | 82.2 | °C | ASTM D648 |
| RTI Elec | 95.0 | °C | UL 746 |
| RTI Imp | 80.0 | °C | UL 746 |
| RTI | 95.0 | °C | UL 746 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| High Amp Arc Ignition (HAI) | PLC 2 | UL 746 | |
| High Voltage Arc Tracking Rate (HVTR) | PLC 4 | UL 746 | |
| Hot-wire Ignition (HWI) | PLC 2 | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.47 mm | V-0 | UL 94 | |
| 3.00 mm | 5VA | UL 94 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 93.3 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Cylinder Zone 1 Temp. | 204 - 216 | °C | |
| Cylinder Zone 2 Temp. | 207 - 216 | °C | |
| Cylinder Zone 3 Temp. | 207 - 216 | °C | |
| Cylinder Zone 4 Temp. | 210 - 216 | °C | |
| Cylinder Zone 5 Temp. | 210 - 216 | °C | |
| Adapter Temperature | 210 - 216 | °C | |
| Die Temperature | 216 - 221 | °C |
| Extrusion instructions |
|---|
| Head - Zone 6 - Top Temperature: 210 - 216 °CHead - Zone 7 - Bottom Temperature: 213 - 218 °CMelt Temperature (Parison): 210 - 216 °CMold Temperature: 52 - 71 °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 50mm/min |
| 2 . | 1.3 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SILVER® ABS 313NL | Guangdong Silver Age Sci & Tech. Co., Ltd | ABS | SILVER® |
| NuSil CV-2961 | NuSil Technology | Silicone | NuSil |
| Fainplast PVC MPH 73 | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| Elvax® 440 | DuPont Packaging & Industrial Polymers | EVA | Elvax® |
| Lucent PP GPP-140 | Lucent Polymers, Inc. | PP Homopolymer | Lucent PP |
