Order Products : sales@su-jiao.com
PRL AH-GP2
| Category: | Acetal (POM) Homopolymer , Acetal (POM) Homopolymer |
| Manufacturer: | Polymer Resources Ltd. |
| Trademark: | PRL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | At1vrG_PRL-AH-GP2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PRL AH-GP2 is an Acetal (POM) Homopolymer product. It can be processed by injection molding and is available in North America. Characteristics include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.42 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/1.05 kg) | 14 to 16 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.8 to 2.1 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 3.18 mm | 67.6 | MPa | |
| Break, 3.18 mm | 67.6 | MPa | |
| Flexural Modulus (3.18 mm) | 2830 | MPa | ASTM D790 |
| Flexural Strength (3.18 mm) | 94.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 75 | J/m | ASTM D256 |
| Gardner Impact (3.18 mm) | 22.6 | J | ASTM D3029 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.18 mm | 166 | °C | |
| 1.8 MPa, Unannealed, 3.18 mm | 110 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.59 mm | HB | ||
| 3.18 mm | HB |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 76.7 to 82.2 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Drying Time, Maximum | 8.0 | hr | |
| Rear Temperature | 193 to 204 | °C | |
| Middle Temperature | 196 to 207 | °C | |
| Front Temperature | 199 to 210 | °C | |
| Processing (Melt) Temp | 199 to 210 | °C | |
| Mold Temperature | 79.4 to 98.9 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LAF471 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| SUSTAPEEK MG black | Röchling Sustaplast SE & Co. KG | PEEK | SUSTAPEEK |
| Iupilon® LCH2410 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| OmniLon™ PA6 U IM20 BK1000 | OMNI Plastics, LLC | Nylon 6 | OmniLon™ |
| TECHNYL® B 738 MX15 GREY 3279 | Solvay Engineering Plastics | Nylon 66/6 | TECHNYL® |
