Order Products : sales@su-jiao.com
Generic TSU-Ether
| Category: | TSU-Ether , Polyurethane Thermoset Elastomer, Polyether Based |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AsdNHh_Generic-TSU-Ether.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic TSU-Ether This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 to 1.20 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.20 to 0.35 | % | ASTM D955 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Demold Time | 350 to 370 | min |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Viscosity (23°C) | 0.075 to 1.6 | Pa·s | |
| Curing Time (23°C) | 29 to 1.7E+2 | hr | |
| Gel Time (23°C) | 10 to 25 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (23°C) | 10 to 85 | ||
| Tensile Strength (23°C) | 1.03 to 12.1 | MPa | |
| Tensile Elongation at Break (23°C) | 170 to 510 | % | |
| Tear Strength (23°C) | 4.38 to 37.7 | kN/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polyvel PLA CT-L02 PLA Melt Strength Enhancer | Polyvel Inc. | PLA | Polyvel PLA |
| TOTAL Polystyrene Impact 3630 | TOTAL Refining & Chemicals | PS (MIPS) | TOTAL Polystyrene |
| DURAFIDE® 1140A1 | Polyplastics Co., Ltd. | PPS | DURAFIDE® |
| HANWHA KL-701 | Hanwha Chemical | PVC, Unspecified | HANWHA |
| POLYabs XX0 | Polykemi AB | ABS | POLYabs |
