Order Products : sales@su-jiao.com

Eltex® B4020N1331

Category:	HDPE , High Density Polyethylene
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	AqRBVI_Eltex-B4020N1331.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Eltex® B4020N1331 is a high-density polyethylene copolymer particularly intended for the injection moulding and compression moulding of screw caps for the packaging of beverages. It is especially suitable for applications requiring high environmental stress cracking resistance. Thanks to high purity and excellent organoleptic properties, this grade is particularly intended for the packaging in direct contact with beverages.
Typical applications

Caps & closures for the packaging of sparkling water and carbonated soft drinks

Benefits and Features

Very good stress cracking resistance

Excellent processing performances

High impact strength

Excellent, quality controlled organoleptic properties. In order to preserve the excellent organoleptic properties, it is important not to exceed a melt temperature of 250°C during processing.

Slip agent free grade

General Information
Features	High purity High ESCR (Stress Cracking Resistance) Impact resistance, high Workability, good Good sensory characteristics
Uses	Shield Shell
RoHS Compliance	Contact manufacturer
Forms	Particle
Processing Method	Compression molding Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.952	g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.2	g/10 min	ISO 1133
Environmental Stress-Cracking Resistance	16.0	hr	ASTM D1693

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1100	MPa	ISO 527-2/1B
Tensile Stress (Yield, 23°C)	25.0	MPa	ISO 527-2/50

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	6.0	kJ/m²	ISO 179

Additional Information
The value listed as Density, ISO 1183, was tested in accordance with ISO 1872.The value listed as Enviro. Stress Crack Res. ASTM D1693, was tested in accordance with INEOS test methods.Organoleptic Properties, INEOS Method: OK

Resin Grade	Manufacturer	Category	Trademark
PRIME TPO R110E	Prime Polymer Co., Ltd.	PP Impact Copolymer	PRIME TPO
SPI CPPFG18CNAT	Service Polymers, Inc.	PP Impact Copolymer	SPI
Aurora PVC AP3141 Series	Aurora Plastics, Inc.	PVC, Rigid	Aurora PVC
GLS Acetal UN02	GLS Polymers Pvt. Ltd.	Acetal (POM) Copolymer	GLS Acetal
LOXIM 831 02T HB	LOXIM Industries Private Limited	PP Copolymer	LOXIM