Order Products : sales@su-jiao.com
Hanwha Total TPE SE80
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | HANWHA TOTAL PETROCHEMICALS Co., Ltd. |
| Trademark: | Hanwha Total TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AngVKt_Hanwha-Total-TPE-SE80.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SE80 Thermoplastic Elastomer is a dynamically fully cured thermoplastic elastomer. There is no vulcanization, and this is shipped pre-mixed an ready to process. This can be processed on extrusion,injection and blow molding equipment for faster molding cycle times and lower per-part costs. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 10.8 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 450 | % | ASTM D412 |
| Tear Strength | 34.3 | kN/m | ASTM D624 |
| Compression Set (25°C, 70 hr) | 40 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polytron® P60B08-S | Polyram Ram-On Industries | PP Homopolymer | Polytron® |
| POLYLAC® PA-765B | CHI MEI CORPORATION | ABS | POLYLAC® |
| Sylvin 6065-85-LTGL Natural | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| Carboprene® 2530 AV NAT | SO.F.TER. SPA | PP Homopolymer | Carboprene® |
| Sylvin 5145-85 Clear 876 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
