Order Products : sales@su-jiao.com
Mecoline IS RDX 1207 F
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Melos GmbH |
| Trademark: | Mecoline |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AneoeF_Mecoline-IS-RDX-1207-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Halogen-free, low smoke, UV and ozone resistant, max. operating temperature 125°C, radiation cross-linkable, flame retardant compoundfor photovoltaic/solar cables for Green Energy/Solar applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.50 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (170°C/21.6 kg) | 23 | g/10 min | ISO 1133 |
| pH | > 4.5 | EN 50267-2-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Pressure Test - penetration 4h at 140°C | 24 | % | IEC 811-3-1 |
| Hot Set 1 | IEC 540 | ||
| Elongation under load | 15 | % | |
| Residual elongation | 5.0 | % | |
| Temperature Index | 250 | °C | ASTM D2863 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Conductivity | < 10.0 | µS/mm |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 170 to 190 | °C | |
| Extruder Screw L/D Ratio | 20.0:1.0 to 25.0:1.0 | ||
| Extruder Screw Compression Ratio | 1.0:1.2 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 49 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | IEC 811-1-1 | ||
| -- 2 | 12.3 | MPa | |
| -- 3 | 10.0 | MPa | |
| Tensile Strain | IEC 811-1-1 | ||
| Break 4 | 160 | % | |
| Break 5 | 230 | % | |
| Break, -40°C | > 30 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | EN 50395 | ||
| 20°C | > 1.0E+14 | ohms·cm | |
| 90°C | > 1.0E+11 | ohms·cm |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 34 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 130 to 150 | °C | |
| Cylinder Zone 2 Temp. | 140 to 160 | °C | |
| Cylinder Zone 3 Temp. | 150 to 170 | °C | |
| Cylinder Zone 4 Temp. | 160 to 180 | °C | |
| Cylinder Zone 5 Temp. | 160 to 180 | °C | |
| Adapter Temperature | 165 to 185 | °C | |
| Die Temperature | 170 to 190 | °C |
| Note Message | |
|---|---|
| 1 . | at 200°C/15min/0.2 MPa |
| 2 . | After crosslinking |
| 3 . | Before crosslinking |
| 4 . | After crosslinking |
| 5 . | Before crosslinking |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravamid® B BK45 | Ravago Group | Nylon 6 | Ravamid® |
| DENKA POVAL MP-10R | Denka Company Limited | PVOH | DENKA POVAL |
| DENILUB N 00U 2GR | Vamp Tech | Nylon 6 | DENILUB |
| PERCOM® DCG30 | A. Schulman Europe | PP Copolymer | PERCOM® |
| LinGen FR195 | Shanghai Lin Gen Rubber Materials Co., Ltd. | PPE | LinGen |
