Order Products : sales@su-jiao.com
TOTAL Polyethylene HD 6082
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | TOTAL Refining & Chemicals |
| Trademark: | TOTAL Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AnSB7y_TOTALPolyethyleneHD6082.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HD6082 is a high density polyethylene with excellent organoleptic properties with low odor and taste. It also has a very good rigidity, processability and stress-cracking resistance. HD6082 is especially suited for the production of caps & closures for non-carbonated drinks by injection moulding. This grade does not contain a slip agent. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1300 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 29.0 | MPa | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 133 | °C | ISO 11357-3 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | < 250 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TechnoDur PBT 4 GF10 FR | TechnoCompound GmbH | PBT | TechnoDur |
| Mylar® S (92 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| Alathon® L4907 | LyondellBasell Industries | HDPE, HMW | Alathon® |
| EPO-TEK® H70E | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| ALCOM® AWL 113/15 WT1013-12LB | ALBIS PLASTIC GmbH | PC+ABS | ALCOM® AWL |
