Order Products : sales@su-jiao.com

Jam HP-LL18XF5N

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Jam Petrochemical Company
Trademark:	Jam
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	AnS3NC_JamHPLL18XF5N.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

HP-LL18XF5 N is a termopolymer of ethylene, propylene & butene-1 for high strength application especially heavy duty shipping sacks, ice bag, frozen food bags, potato bags and agriculture films which have good sealability and excellent puncture resistance. Goods produced from this grade have outstanding toughness, excellent puncture resistance, good heat sealing behavior and excellent machinability on conversion lines. HP-LLDPE's process is easier than conventional LLDPEs and have low gel. HP-LL18XF5 N is a grade without slip additives.

Features

Exellent punctuer resistance.

Exellent machinability on conversion lines.

Applications

T-bags & other bags, Food Packaging for frozen products, Agricultural film, Heat seal film, Food Packaging

General Information
Additive	Anti-caking agent Antioxidation
Features	High Toughness Low speed solidification crystal point High strength Perforation resistance Anti-caking property Antioxidation Machinable Heat sealable Terpolymer
Uses	Films Bags Agricultural application Food packaging Heavy packing bag

Physical	Nominal Value	Unit	Test Method
Density	0.918 - 0.922	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.50	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Flow : Yield	11.0	MPa	ASTM D638
Transverse flow : Yield	10.0	MPa	ASTM D638
Flow : Fracture	40.0	MPa	ASTM D638
Transverse flow : Fracture	35.0	MPa	ASTM D638
Tensile Elongation			ASTM D638
Flow : Fracture	600	%	ASTM D638
Transverse flow : Fracture	750	%	ASTM D638

Films	Nominal Value	Unit	Test Method
Dart Drop Impact	130	g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD	240	g	ASTM D1922
TD	400	g	ASTM D1922

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	127	°C	ASTM D1525

Optical	Nominal Value	Unit	Test Method
Gloss (45°)	25		ASTM D2457
Haze	30	%	ASTM D1003

Resin Grade	Manufacturer	Category	Trademark
Starex VE-0856	SAMSUNG SDI CO., LTD.	ABS	Starex
Starflam P10002EP	Eurostar Engineering Plastics	Nylon 6	Starflam
4DUR® 9K22130 HFR1	4Plas	PBT	4DUR®
INEOS PP 100-GA09	INEOS Olefins & Polymers Europe	PP Homopolymer	INEOS PP
LNP™ THERMOCOMP™ EFB26ER compound	SABIC Innovative Plastics Europe	PEI	LNP™ THERMOCOMP™