| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Canuck Compounders Inc. |
| Trademark: | Canuck Compounds |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AnCTP9_Canuck-Compounds-300-Series---BK-3-5-5.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| Canuck Compounds 300 Series - BK 3-5-5 is a Polypropylene material. It is available in North America for injection molding. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.938 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 1.3 to 1.7 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 23°C) | 25.5 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, 23°C) | 5.0 | % | ASTM D638 |
| Flexural Modulus (23°C) | 1380 | MPa | ASTM D790A |
| Flexural Strength (23°C) | 41.4 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 130 | J/m | ASTM D256 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P1957TA | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Polymer-E EV101 | Asia Polymer Corporation (APC) | EVA | Polymer-E |
| APEX® 04-A0300B-100 | Teknor Apex Company | PVC, Flexible | APEX® |
| Petrotene® PP A3 T20 E20 PRTA011 PH375 | Petropol Industry and Trade of Polymers LTDA | PP, Unspecified | Petrotene® PP |
| OTECH ALLOY OTO9141LSZH - Riser Jacket | OTECH Corporation | TP, Unspecified | OTECH ALLOY |