Order Products : sales@su-jiao.com
Stanyl® HFX82S
| Category: | Nylon 46 , Polyamide 46 |
| Manufacturer: | DSM Engineering Plastics |
| Trademark: | Stanyl® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AmT87V_StanylHFX82S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Stanyl®HFX82S is a polyamide 46 (nylon 46) material, which contains a 45% glass fiber reinforced material. This product is available in the Asia-Pacific region,. Stanyl®The main features of HFX82S are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.60 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Transverse flow | 0.90 | -- | % | ISO 294-4 |
| Flow | 0.30 | -- | % | ISO 294-4 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 15000 | -- | MPa | ISO 527-2 |
| Tensile Stress (Break) | 180 | -- | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.2 | -- | % | ISO 527-2 |
| Flexural Modulus | 14000 | -- | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 13 | -- | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 70 | -- | kJ/m² | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 282 | -- | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 275 | -- | °C | ISO 75-2/A |
| Melting Temperature 1 | 278 | -- | °C | ISO 11357-3 |
| Electrical | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| Relative Permittivity (1.00 GHz) | 4.20 | 4.40 | IEC 60250 |
| Flammability | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| Flammability Classification (3.2 mm) | V-0 | -- | IEC 60695-11-10, -20 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 4.0 - 8.0 | hr | |
| Rear Temperature | 280 - 320 | °C | |
| Middle Temperature | 300 - 320 | °C | |
| Front Temperature | 300 - 320 | °C | |
| Nozzle Temperature | 300 - 320 | °C | |
| Processing (Melt) Temp | 305 - 320 | °C | |
| Mold Temperature | 80 - 120 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.500 - 3.00 | MPa | |
| Screw Compression Ratio | 2.5:1.0 |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BESN Noir TL | Arkema | Nylon 11 | Rilsan® |
| SCHULAMID® 6 MT 30 | A. Schulman Europe | Nylon 6 | SCHULAMID® |
| Synthos EPS® 1020S/CZ | Synthos S.A. | PS (EPS) | Synthos EPS® |
| Nycast CP | Cast Nylons Ltd. | Nylon 6 | Nycast |
| INEOS HDPE TUB 121 | INEOS Olefins & Polymers USA | HDPE Copolymer | INEOS HDPE |
