Order Products : sales@su-jiao.com
KRATON® G1651 H
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AkySko_KRATON-G1651-H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton G1651 H is a clear, linear copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below.
Kraton G1651 H is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G1651 H in applications that must withstand weathering and high processing temperatures. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D4025 |
| Antioxidant Additive 1 | 0.030 to 0.10 | % | Internal Method |
| Melt Flow - 230°C/5kg | No Flow | ASTM D1238 | |
| Polystyrene Content | 31 to 35 | % | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.50 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Styrene/Rubber ratio | 33/67 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 60 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | > 27.6 | MPa | Internal Method |
| Tensile Elongation (Break) | > 800 | % | Internal Method |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 6034-85 Clear | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| ARMAMID® PA MN 20-1AP | Poly Plastic | Nylon 6 | ARMAMID® |
| Luran® S 778TE | Styrolution | ASA | Luran® S |
| OmniTech™ PBSN GR30 | OMNI Plastics, LLC | PBT+SAN | OmniTech™ |
| ALTECH® NXT PP-H A 2040/456.01 LE GF40 CP | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® NXT PP-H |
