Order Products : sales@su-jiao.com

TOTAL Polystyrene Crystal 1810

Category:	PS (GPPS) , General Purpose Polystyrene
Manufacturer:	TOTAL Refining & Chemicals
Trademark:	TOTAL Polystyrene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Ae42Hz_TOTAL-Polystyrene-Crystal-1810.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
POLYSTYRENE CRYSTAL 1810 is a very easy flowing crystal polystyrene designed for the injection moulding industry. The excellent processing characteristics of this grade allows for the production of articles which are very thin and/or have complex flow patterns. In extrusion, POLYSTYRENE CRYSTAL 1810 is used as a high gloss capping layer in co-extrusion.

General Information
Features	Food Contact Acceptable Good Flow Good Processability High Gloss
Uses	Appliance Components Business Equipment Masterbatch Thin-walled Parts Toys Writing Instruments
Agency Ratings	EC 1907/2006 (REACH)
Forms	Pellets
Processing Method	Coextrusion Extrusion Injection Molding
Multi-Point Data	Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density
--	1.05	g/cm³	ISO 1183
--	1050	kg/m³	ISO 1183 ¹
Apparent Density	0.60	g/cm³	ISO 60
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	20	g/10 min	ISO 1133
Melt volume-flow rate (200°C/5.0 kg)	21.0	cm³/10min	ISO 1133 ²
Molding Shrinkage	0.40 to 0.70	%	ISO 294-4
Water Absorption
23°C, 24 hr	< 0.10	%	ISO 62
Saturation	0.10	%	ISO 62 ³

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (L-Scale)	70		ISO 2039-2

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
--	3100	MPa	ISO 527-2
--	3000	MPa	ISO 527-2 ⁴
Tensile Stress
Break	42.0	MPa	ISO 527-2
Break	40.0	MPa	ISO 527-2 ⁵
Tensile Strain (Break)	2.0	%	ISO 527-2
Tensile Creep Modulus (1 hr)	2900	MPa	ISO 899-1 ⁶
Flexural Modulus	2900	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength
--	8.0	kJ/m²	ISO 179/1eU
23°C	12.0	kJ/m²	ISO 179/1eU ⁷

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
1.8 MPa, Unannealed	72.0	°C	ISO 75-2/A
1.8 MPa, Annealed	81.0	°C	ISO 75-2/A
1.8 MPa	84.5	°C	ISO 75-2 ⁸
Vicat Softening Temperature
--	90.0	°C	ISO 306/A50
--	85.0	°C	ISO 306/B50
50°C/h, B (50N)	82.0	°C	ISO 306 ⁹
CLTE
Flow	7.1E-5	cm/cm/°C	ISO 11359-2
Transverse	7.0E-5	cm/cm/°C	ISO 11359-2 ¹⁰

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity
--	> 1.0E+15	ohms	IEC 60093
--	1.0E+14	ohms	IEC 60093 ¹¹
Electric Strength	140	kV/mm	IEC 60243-1

Note Message
1 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
2 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
4 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
5 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
6 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
7 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
8 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
9 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
10 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
11 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

Resin Grade	Manufacturer	Category	Trademark
RTP 207 B TFE 15	RTP Company	Nylon 610	RTP
Cheng Yu C660F	Cheng Yu Plastic Company Limited	PC+ABS	Cheng Yu
EPO-TEK® H20E-PFC	Epoxy Technology Inc.	Epoxy	EPO-TEK®
LUBAN™ 1128 N	Oman Oil Refineries & Petroleum Indistries Co. (Orpic)	PP Homopolymer	LUBAN™
ALCOM® AWL 109/10 GF20 WT1142-12LB	ALBIS PLASTIC GmbH	PC+ABS	ALCOM® AWL