Order Products : sales@su-jiao.com
Elastocon® 2825
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Aa5zIb_Elastocon-2825.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Elastocon® 2825 thermoplastic elastomer compound has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® 2825 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics and resilience. Elastocon® 2825 can be overmolded onto polypropylene. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.880 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 2.7 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 25 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.724 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 4.94 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 530 | % | ASTM D412 |
| Compression Set (23°C, 22 hr) | 13 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 138 - 160 | °C | |
| Front Temperature | 166 - 182 | °C | |
| Nozzle Temperature | 188 - 204 | °C | |
| Mold Temperature | 15.6 - 48.9 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 - 0.689 | MPa |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | < 79.4 | °C | |
| Cylinder Zone 1 Temp. | 149 - 177 | °C | |
| Cylinder Zone 2 Temp. | 149 - 177 | °C | |
| Cylinder Zone 3 Temp. | 149 - 177 | °C | |
| Cylinder Zone 4 Temp. | 149 - 177 | °C | |
| Cylinder Zone 5 Temp. | 149 - 177 | °C | |
| Die Temperature | 149 - 177 | °C |
| Extrusion instructions |
|---|
| Compression ratio: 2.5 to 3.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vital-Line SHM3905G | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Vital-Line |
| Trithene® TS 3003 | Petroquimica Triunfo | LDPE | Trithene® |
| 4MID® 9A22120 | 4Plas | Nylon 66 | 4MID® |
| ALFATER XL® A90E 1GP0000 | ALBIS PLASTIC GmbH | TPV | ALFATER XL® |
| Axiall PVC 9175 | Axiall Corporation | PVC, Flexible | Axiall PVC |
