Order Products : sales@su-jiao.com
Sinvicomp SIZ4805
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AYYn3V_Sinvicomp-SIZ4805.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| "Sinvicomp" SIZ 4805 is a wire & cable polyvinylchloride compound available in pellet form. SIZ 4805 provides good performance for insulation of electrical wires. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 41 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 20.0 | MPa | IEC 811-1-1 |
| Tensile Elongation (Break) | 250 | % | IEC 811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Changes in mechanical properties after hot air aging test, 136°C, 240 hr 1 | IEC 811-1-2 | ||
| Tensile strength change | 10 | % | IEC 811-1-2 |
| Change in tensile elongation | 15 | % | IEC 811-1-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal Stability (200°C) | 3.5 | hr | BS 2782 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (20°C) | 1.0E+14 | ohms·cm | BS 2782 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 29 | % | ASTM D2863 |
| Additional Information |
|---|
| Typical temperature profile for processing SINVICOMP compound is from 160°C to 185°C. The optimum temperatures depend on the type of machine as well as screw design being used to process SINVICOMP.Feeding zone: 160°CCompression zone: 170°C~180°CMixing zone: 175°C~185°CNozzle/Die Zone: 185°C |
| Note Message | |
|---|---|
| 1 . | 136±2°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ebalta MG 804 GF / MG 804-1 | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
| HiFill® PA6/6 GF15 IM HS L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| LEXAN™ 925 resin | SABIC Innovative Plastics | PC | LEXAN™ |
| LNP™ STAT-KON™ JX89626 compound | SABIC Innovative Plastics | PESU | LNP™ STAT-KON™ |
| Lutene® XL8080UC | LG Chem Ltd. | PE, Unspecified | Lutene® |
