Order Products : sales@su-jiao.com
Utomer UT81P80A
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Shanghai Utomer Material Science Co., Ltd. |
| Trademark: | Utomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AYBigU_Utomer-UT81P80A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Utomer Polyether type TPU which can be applied to Injection, Extrusion and Calendering. Molding cycle is short and efficient for Injection production. The stability melt is easy for Extrusion production. Hydrolysis resistance, low temperature performance with a wide processing window. Extrusion Blown, Flat Die Cast Film, Injection Tag Wheel and Cable Jacketing |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 79 to 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 25.0 | mm³ | DIN 53516 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 6.00 | MPa | |
| 300% Strain | 10.0 | MPa | |
| Tensile Strength | 25.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 600 | % | ASTM D412 |
| Tear Strength | 0.0800 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 23°C, 70 hr | 30 | % | |
| 70°C, 24 hr | 40 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -55.0 | °C | ASTM D3418 |
| Melting Temperature | 180 to 195 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NYCOA Polyamide 2038 | Nycoa (Nylon Corporation of America) | Nylon 6 | NYCOA Polyamide |
| Forprene® 6NM001A45 | SO.F.TER. SPA | TPV | Forprene® |
| Grilamid® L 16 GM nat | EMS-GRIVORY | Nylon 12 | Grilamid® |
| HiFill® PPSU 4000 BK | Techmer Engineered Solutions | PPSU | HiFill® |
| Plaslube® J-1/30/TF/22 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
