Order Products : sales@su-jiao.com
OpteSTAT™ PBT DP492x1
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Ovation Polymers Inc. |
| Trademark: | OpteSTAT™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AY55CN_OpteSTAT-PBT-DP492x1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Electrically conductive Polybutadiene Terephthalate injection molding grade. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(23°C) | 2690 | MPa | ASTM D638 |
| Tensile Strength 2(Break, 23°C) | 47.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, 23°C) | 8.8 | % | ASTM D638 |
| Flexural Modulus 4(23°C, 50.0 mm Span) | 3000 | MPa | ASTM D790 |
| Flexural Strength 5(Break, 23°C, 50.0 mm Span) | 52.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 91 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 150 | °C | |
| 1.8 MPa, Unannealed | 56.0 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 2.6E+5 | ohms | ASTM D257 |
| Volume Resistivity | 2.8E+5 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 90.0 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 190 to 210 | °C | |
| Middle Temperature | 210 to 230 | °C | |
| Front Temperature | 220 to 240 | °C | |
| Nozzle Temperature | 230 to 250 | °C | |
| Processing (Melt) Temp | 240 to 250 | °C | |
| Mold Temperature | 50.0 to 60.0 | °C | |
| Back Pressure | 20.0 to 40.0 | MPa | |
| Screw Speed | 60 to 80 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starex PT-0180 | SAMSUNG SDI CO., LTD. | ABS | Starex |
| Unichem 9012-A-02 | Colorite Polymers | PVC, Unspecified | Unichem |
| ICORENE® 9031 BA8 | ICO Polymers SA, A Division of A. Schulman | PE, Unspecified | ICORENE® |
| Iupilon® MB2112N | Mitsubishi Engineering-Plastics Corp | PC+Polyester | Iupilon® |
| TECHNYL® C 206F NATURAL (R) | Solvay Engineering Plastics | Nylon 6 | TECHNYL® |
