Order Products : sales@su-jiao.com
Baytec® 352 (86A)
| Category: | TSU , Polyurethane Thermoset Elastomer |
| Manufacturer: | Covestro - PUR |
| Trademark: | Baytec® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AVQW2m_Baytec-352-86A-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Baytec 352 is a two-component, one-shot system that yields a solid polyurethane elastomer with good mechanical properties in the hardness range of Shore 75A to 90A. As with any product, use of Baytec 352 in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. |
| General Information | |
|---|---|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 86 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles) | 92.0 | mg | ASTM D3489 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 19.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 260 | % | ASTM D412 |
| Tear Strength | |||
| -- 1 | 84.6 | kN/m | ASTM D624 |
| Cracking | 33 | kN/m | ASTM D1938 |
| Compression Set (70°C, 22 hr) | 69 | % | ASTM D395B |
| Bayshore Resilience | 34 | % | ASTM D2632 |
| Thermoset | Nominal Value | ||
|---|---|---|---|
| Thermoset Components | |||
| Part C 2 | Mixing ratio by weight: 15 | ||
| Component a 3 | Mixing ratio by weight: 71 | ||
| Component B 4 | Mixing ratio by weight: 100 |
| Additional Information |
|---|
| Values at an Index of 1.05Part A Type: Isocyanate Appearance: Pale yellow liquid Specific Gravity @ 25°C: 1.22 Viscosity @25°C: 105 to 175 mPa Flash Point, PMCC: 213°C NCO: 25.5 to 26.5 wt% Bulk Density at 25°C: 10.17 lb/gal Part B Type: Polyol Appearance: White solid Specific Gravity @ 25°C: 1.11 Viscosity @73°C: 1620 mPa-s Flash Point, PMCC: 110°C Bulk Density at 25°C: 9.179 lb/gal Water: <0.05 wt% max Hydroxyl Number: 45 to 53 mg KOH/g Acid Number: 0.5 mg KOH/g max Baytec 352 Isocyanate Temperature: 25°CBaytec 352 Polyol/Extender Blend Temperature: 80°CMold Temperature: 110°CDemold Time: 1 to 4 hrPost Cure: 16 hr at 110°C |
| Note Message | |
|---|---|
| 1 . | C mould |
| 2 . | 1,4 Butone Diol |
| 3 . | Isocyanate |
| 4 . | Polyol |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1381 TFE 20 | RTP Company | PPS | RTP |
| Starex HR-0370F | SAMSUNG SDI CO., LTD. | ABS | Starex |
| Daelim Po1y® LH-418 | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| Geon™ Vinyl Flexible 86143 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Durethan® BG 30 X W1 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
