Order Products : sales@su-jiao.com
SuperLite® SL551000-100 (3.5mm)
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Azdel, Inc. |
| Trademark: | SuperLite® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AV7rNS_SuperLite-SL551000-100-3-5mm-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| AZDEL SuperLite SL551000-100 (3.5mm) is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the application (i.e.; adhesive films, barrier films, scrim, tough PP films, non-wovens, reinforcements or just the bare surface.) Typically used in non-structural applications where a very high strength to weight ratio is required, such as automotive headliners, door panels, package shelves, and other interior trim. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.329 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | < 0.020 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2000 | MPa | ASTM D638 |
| Tensile Strength | 16.0 | MPa | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact | ASTM D3763 | ||
| 23°C, Energy at Peak Load | 4.10 | J | ASTM D3763 |
| 23°C, Total Energy | 7.20 | J | ASTM D3763 |
| Additional Information |
|---|
| Multi-axial Impact Peak Force, ASTM D3763, 23°C: 770 NMass per unit area, Internal Test Method: 1000 g/m²Flexual Strength, SAE J949: 10 MPaFlexual Modulus, SAE J949: 950 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Glas® 2103-22 CR-SX | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| RTP 362 | RTP Company | PC | RTP |
| VERSIFY™ 2300 | The Dow Chemical Company | TPO (POE) | VERSIFY™ |
| EPLAMID 6 GFR 40 NC | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 6 | EPLAMID 6 |
| Medalist® MD-12160 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Medalist™ |
