Order Products : sales@su-jiao.com
Ebalta GH 705 / TL
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Ebalta Kunststoff GmbH |
| Trademark: | Ebalta |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | APwOd3_Ebalta-GH-705-TL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ebalta GH 705/TL is a thick-castable, aluminium-filled, heat-resistant, two-components epoxy resin, which shows aluminium-like properties after curing at room temperature. Due to high aluminium contents GH 705/TL shows good thermal conductivity, is well workable and has a low linear expansion coefficient. Applications
Properties
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Shore Hardness (Shore D) | 83 to 89 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 6900 to 7500 | MPa | ISO 178 |
| Flexural Stress | 75.0 to 85.0 | MPa | ISO 178 |
| Compressive Stress | 75.0 to 85.0 | MPa | ISO 604 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 10 to 16 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 88.0 to 94.0 | °C | ISO 75-2/B |
| CLTE - Flow | 6.3E-5 | cm/cm/°C | DIN 53752 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 10 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Post Cure Time | |||
| 60°C | 8.0 to 12 | hr | |
| 80°C | 8.0 to 12 | hr |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (20°C) | 1.65 to 1.75 | g/cm³ | |
| Viscosity (25°C) | 6.3 to 7.7 | Pa·s | |
| Curing Time (20°C) | 16 to 24 | hr | |
| Pot Life 1(20°C) | 65 to 75 | min |
| Note Message | |
|---|---|
| 1 . | 200 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ DP-9162-3 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
| RAMOFIN PPH501G4 | Polyram Ram-On Industries | PP Homopolymer | RAMOFIN |
| Shinko-Lac® ABS 3001MH | Mitsubishi Rayon America Inc. | ABS | Shinko-Lac® |
| Dryflex® CS 90A001N | ELASTO | SEBS | Dryflex® |
| Electrafil® PA6/6 03004 GF20 | Techmer Engineered Solutions | Nylon 66 | Electrafil® |
