Order Products : sales@su-jiao.com
MORETEC™ 1018CN
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Prime Polymer Co., Ltd. |
| Trademark: | MORETEC™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AOdZQw_MORETEC-1018CN.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| MORETEC™ 1018CN is a Linear Low Density Polyethylene product. It can be processed by cast film and is available in Asia Pacific, Europe, or North America. Applications of MORETEC™ 1018CN include coating applications and film. Primary characteristic: good sealability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | < 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 51 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Injection Molded) | 7.20 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | < 300 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 140 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 90.0 | °C | ISO 306 |
| Melting Temperature | 117 | °C | ISO 11357-3 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAIRIPRO K7009AH | Formosa Plastics Corporation | PP Impact Copolymer | TAIRIPRO |
| WPP PP JOSB26624 | Washington Penn Plastic Co. Inc. | PP Impact Copolymer | WPP PP |
| Yuyao PET PETG0 | Yuyao Tenglong Plastics Co., Ltd. | PET | Yuyao PET |
| ELASTOSIL® N 9111 BLACK | Wacker Chemie AG | Silicone | ELASTOSIL® N |
| EPAMOULD 285A10 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
