Order Products : sales@su-jiao.com
CERTENE™ HI-863
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AOLHDy_CERTENE-HI-863.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HI-863 is a certified prime grade designed for INJECTION MOLDING of large sized industrial applications requiring high Stiffness, good Toughness and good Impact strength. HI-863 features easy processability, excellent dimensional stability, and high Warpage resistance. HI-863 suggested applications include bottle crates, fish crates, fruit trays, vegetable trays, cases, tote bins, and structural foam. HI-863 recommended processing temperature is 220 to 250°C. with mold @ 20 to 40°C.. HI-863 complies with FDA regulation 21CFR 177.1520 (c) 3.2 (a) and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.963 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 1.75 mm, 100% Igepal, Compression Molded, F50) | 3.00 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Compression Molded) | 32.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | 600 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Compression Molded) | 1550 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Compression Molded) | 54 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 78.0 | °C | ASTM D648 |
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 125 | °C | ASTM D1525 |
| Additional Information |
|---|
| Test specimens from compression molded plaque according to ASTM D 1928 Procedure C. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 - 250 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Notched Bent Strip |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2720 S-50A | RTP Company | SEBS | RTP |
| NILENE® E10 K20T | Taro Plast S.p.A. | PP Copolymer | NILENE® |
| Eastobond™ 19412 | Eastman Chemical Company | Copolyester | Eastobond™ |
| Geon™ Vinyl Flexible R355AM | PolyOne Corporation | PVC+NBR | Geon™ Vinyl Flexible |
| Hostacom ERC 204 N | LyondellBasell Industries | PP, Unspecified | Hostacom |
