Order Products : sales@su-jiao.com
UPES® 315-FLR
| Category: | PS+PE , Polystyrene + PE |
| Manufacturer: | NOVA Chemicals |
| Trademark: | UPES® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AO9GXE_UPES-315-FLR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UPES® 315-FLR is a Polystyrene + PE (PS+PE) material. It is available in North America. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.980 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.40 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(Injection Molded) | 2040 | MPa | ASTM D638 |
| Tensile Strength 2(Break, Injection Molded) | 32.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Injection Molded) | 4.3 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1880 | MPa | ASTM D790 |
| Flexural Strength 4(Yield, Injection Molded) | 54.0 | MPa | ASTM D790 |
| Flexural Strain - Yield 5 | > 5.0 | % | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | 19 | J/m | ASTM D256 |
| Unnotched Izod Impact (Injection Molded) | 820 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 104 | °C | ASTM D1525 6 |
| Note Message | |
|---|---|
| 1 . | 5.1 mm/min |
| 2 . | 5.1 mm/min |
| 3 . | 5.1 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 0.05 in/min, Injection Molded |
| 6 . | Rate B (120°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BJB Epoxy TC-1606 A/B | BJB Enterprises, Inc. | Epoxy | BJB Epoxy |
| COSMOPLENE® AW864 | TPC, The Polyolefin Company (Singapore) Pte Ltd | PP Copolymer | COSMOPLENE® |
| Gallonprene® GP210-8510 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| LNP™ VERTON™ NV0081EV_GY7E149 compound | SABIC Innovative Plastics | PC+ABS | LNP™ VERTON™ |
| Plenco 06401 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |
