Order Products : sales@su-jiao.com
KOPEL® KP3340HR
| Category: | TPC-ET , Thermoplastic Copolyester Elastomer |
| Manufacturer: | Kolon Plastics, Inc. |
| Trademark: | KOPEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AMfNy2_KOPEL-KP3340HR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KOPEL® KP3340HR is a Thermoplastic Copolyester Elastomer (TPC-ET) product. It can be processed by extrusion and is available in Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (210°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.0 | % | ASTM D955 |
| Water Absorption (Equilibrium, 23°C, 60% RH) | 0.70 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 40 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 20.6 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 79 | % | ASTM D638 |
| Flexural Modulus (23°C) | 95.1 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, CS-17 Wheel) | 4.00 | mg | ASTM D1044 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 65.0 | °C | ASTM D648A |
| Brittleness Temperature 1 | < -70.0 | °C | ASTM D746 |
| Peak Melting Temperature | 170 | °C | ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Solenoid Brittle Point |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sarlink® TPV 4149DN | Teknor Apex Company | TPV | Sarlink® TPV |
| Tecoform® PO20 AR10 NL HS | Eurotec Engineering Plastics | Acetal (POM) Copolymer | Tecoform® |
| Chemlon® 66GF6L | Teknor Apex Company (Chem Polymer) | Nylon 66 | Chemlon® |
| Fenochem C 3500 | Chemiplastica, Inc. | Phenolic | Fenochem |
| Geon™ Vinyl Flexible R108BM | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
