Order Products : sales@su-jiao.com
MonoSol® MC-1257
| Category: | MHPC , Methyl Hydroxy Propyl Cellulose |
| Manufacturer: | MonoSol, LLC |
| Trademark: | MonoSol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AL74Gc_MonoSol-MC-1257.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Product Description: Mono-Sol MC-1257 is a rapidly soluble specialty packaging film made from methyl hydroxy propyl cellulose (MHPC). This film is resistant to many chemical reactions which typically create insolubility in PVOH films. MC-1257 has good heat sealing properties and can be converted on conventional packing and pleat wrapping machinery. Toxicological Properties: The ingredients of MC-1257 are designated by the United States Environmental Protection Agency as exempt from tolerance under 40 CFR 180.1001 (d) and therefore the film is approved for use as an inert ingredient in pesticide formulations applied to growing crops under 40 CFR 180.1001 (d). All ingredients are of very low toxicity and are regarded as being non-hazardous. MC-1257 film does not contain any substance listed in OSHA Standard 29 CFR 1910.1000 to 1910.1101. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 30 | µm | |
| Secant Modulus - 1% Secant, MD | 22.1 | MPa | ASTM D882 |
| Tensile Strength - MD (Break) | 23.8 | MPa | ASTM D882 |
| Tensile Elongation - MD (Break) | 80 | % | ASTM D882 |
| Dart Drop Impact | 140 | g | ASTM D1709 |
| Elmendorf Tear Strength - MD | 120 | g | ASTM D1922 |
| Additional Information |
|---|
| Solubility, MSTM 205, 1.2 mil, 50°F Distilled Water: Disintegration, 9 sec; Dissolution, 25 secSolubility, MSTM 205, 1.2 mil, 75°F Distilled Water: Disintegration, 9 sec; Dissolution, 23 secEquilibrium Moisture Content, Test Method Unspecified, 23°C, 40% R.H.: 1.4%Equilibrium Moisture Content, Test Method Unspecified, 23°C, 50% R.H.: 1.9%Equilibrium Moisture Content, Test Method Unspecified, 23°C, 60% R.H.: 2.4%Modulus at 100% Elongation, ASTM D882: 3200 psiMono-Sol® MC-1257 film is also available in additional thicknesses. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ResMart Repro Nylon 6 6 | ResMart | Nylon 66 | ResMart Repro |
| Amilan® U625X21 | Toray Resin Company | Nylon 66 | Amilan® |
| Hyundai EP Adhesives DP730/1002 | HYUNDAI EP Co., Ltd. | PE, Unspecified | Hyundai EP Adhesives |
| ESTOPLAST EP 2030NN01 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
| OTECH ALLOY OM6018-Boot | OTECH Corporation | TP, Unspecified | OTECH ALLOY |
