Order Products : sales@su-jiao.com
Braskem PP DR7037.01
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Braskem Europe GmbH |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AKQQ0a_BraskemPPDR703701.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DR7037.01 Developmental Polypropylene is a random copolymer for thin wall injection moulding applications. This grade is characterized by excellent balance of stiffness and impact properties, very good optical properties and excellent processability. Applications:
Process: Injection Moulding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 65 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 1060 | MPa | ISO 527-2 |
| Tensile Stress (Yield, Injection Molded) | 30.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 11 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 1200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| 0°C, injection molding | 2.0 | kJ/m² | ISO 179/1eA |
| 23°C, injection molding | 6.0 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 80.0 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 48.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 128 | °C | ISO 306/A |
| -- | 70.0 | °C | ISO 306/B |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze (Injection Molded) | 11 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wellamid® GFT15N050-WBK | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| HOPELEN SY-130 | Lotte Chemical Corporation | PP Homopolymer | HOPELEN |
| ICORENE® 3901 | ICO Polymers APAC, A Division of A. Schulman | mLLDPE | ICORENE® |
| Lumiflon® LF-200 | Asahi Glass Co., Ltd. | Fluoropolymer | Lumiflon® |
| PermaStat® 305 | RTP Company | PC | PermaStat® |
