Order Products : sales@su-jiao.com
Epic Epoxy S7065-02
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epic Resins |
| Trademark: | Epic Epoxy |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AGYxEs_Epic-Epoxy-S7065-02.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Epic S7065-02 is a two component heat cure epoxy potting system developed for the impregnation and potting of high voltage coils for a maximum of environmental protection. This filled epoxy casting system features a 100:34 mix ratio by weight and non-abrasive fillers, making it well suited for most meter-mix / dispense systems. This system is UL 94 V-0 recognized at 1.6mm. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.61 to 1.66 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 25°C) | 88 to 92 | ASTM D2240 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 105 to 115 | °C | ASTM E1356 |
| CLTE - Flow | 3.8E-5 to 4.2E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 3.6E+15 to 4.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength (3.18 mm) | 15 to 17 | kV/mm | ASTM D149 |
| Dielectric Constant (100 kHz) | 3.32 to 3.66 | ASTM D2520 | |
| Dissipation Factor (100 kHz) | 0.62 to 0.68 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Volume: 100 Mix Ratio by Weight: 100 | ||
| Part B | Mix Ratio by Volume: 47 Mix Ratio by Weight: 34 | ||
| Pot Life 1(100°C) | 27 to 35 | min | |
| Thermoset Mix Viscosity (25°C) | 2600 to 3000 | cP | ASTM D2393 |
| Note Message | |
|---|---|
| 1 . | 100 Gram Mass |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AKROMID® A3 GF 20 1 black (2307) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| Devcon Plastic Steel Putty (A) | Devcon | Epoxy | Devcon |
| E-Pos 328 | Epocat Nederland BV | Epoxy | E-Pos |
| KOCETAL® CB301 | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
| Softell DKG100N | LyondellBasell Industries | TPO (POE) | Softell |
