Order Products : sales@su-jiao.com
Jackdaw PC DW70GR6615
| Category: | PC+PET , Polycarbonate + PET |
| Manufacturer: | Jackdaw Polymers |
| Trademark: | Jackdaw PC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AGOfl4_Jackdaw-PC-DW70GR6615.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jackdaw PC DW70GR6615 is a polycarbonate PET (PC PET) product,. It is available in Europe. The main characteristics are: flame retardant/rated flame. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792, ISO 1183 |
| Water Absorption | |||
| 24 hr | 0.80 | % | ASTM D570 |
| 23°C, 24 hr | 0.80 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 70.0 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Break) | 60 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | 2400 | MPa | ASTM D790, ISO 178 |
| Flexural Stress | |||
| -- | 95.0 | MPa | ISO 178 |
| Fracture | 95.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -- 1 | 50.0 | J/m | ASTM D256 |
| -- | 50 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | 130 | °C | ASTM D648, ISO 75-2/B |
| 1.8 MPa, not annealed | 110 | °C | ASTM D648, ISO 75-2/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength | 20 | kV/mm | ASTM D149, IEC 60243-1 |
| Comparative Tracking Index (Solution A) | 630 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information |
|---|
| Comparative Tracking Index (Solution A), ASTM D3638: 630 V |
| Note Message | |
|---|---|
| 1 . | Notch B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SANTAC® AT-05 | Nippon A&L Inc. | ABS | SANTAC® |
| TEPCON® M270 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer | TEPCON® |
| Toughblend® PA66-1700 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | Nylon 6 | Toughblend® |
| Jiangsu Sinarise JM8611 | Jiangsu Sinarise New Material Technology Co., Ltd | TPE | Jiangsu Sinarise |
| SD POLYCA™ IM6023 | Sumika Styron Polycarbonate Limited | PC+ABS | SD POLYCA™ |
