Order Products : sales@su-jiao.com
Devcon 10 Minute™ Epoxy
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Devcon |
| Trademark: | Devcon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ADkdWP_Devcon-10-Minute-Epoxy.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Flexible epoxy with good impact resistance, peel strength, and excellent chemical resistance. Intended Use:
Product features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Volume | 0.889 | cm³/g | |
| Solid content- by Volume | 100 | % |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Impact Resistance | 21.0 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -55 - 93 | °C |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Work Time | 10.0 | min |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Shear Adhesion | 16.5 | MPa | ASTM D1002 |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.13 | g/cm³ |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Elongation (Break) | 5.0 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 31 | kV/mm | ASTM D149 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Component a | Mixing ratio by weight: 100 Mixing ratio by capacity: 1.0 | ||
| Component B | Mixing ratio by weight: 99 Mixing ratio by capacity: 1.0 | ||
| Thermoset Mix Viscosity | 80000 - 90000 | cP |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cured 7 days @ 75°F |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Curing Time | 12 | hr |
| Note Message | |
|---|---|
| 1 . | Mixed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMTAL PM1609 | Polyram Ram-On Industries | Acetal (POM) Copolymer | RAMTAL |
| ShinkoLite-P IR H-70 | Mitsubishi Rayon America Inc. | Acrylic (PMMA) | ShinkoLite-P |
| APEX® 2085 | Teknor Apex Company | PVC, Flexible | APEX® |
| Hostacom TRC 767N/1 | LyondellBasell Industries | TPO (POE) | Hostacom |
| Hytrel® G3548 NC010 | DuPont Performance Polymers | TPC-ET | Hytrel® |
