Order Products : sales@su-jiao.com
Rilsan® AZM 15 TLD
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Arkema |
| Trademark: | Rilsan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ACvYbr_Rilsan-AZM-15-TLD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Rilsan® AZM 15 TLD is a Polyamide 12 (Nylon 12) product filled with filler. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1120 | 1120 | kg/m³ | ISO 1183 1 |
| Melt volume-flow rate (235°C/2.16 kg) | 13.0 | -- | cm³/10min | ISO 1133 2 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile modulus | 3500 | 3100 | MPa | ISO 527-2 3 |
| Tensile Stress (Break) | 78.0 | 72.0 | MPa | ISO 527-2 4 |
| Tensile Strain (Break) | 7.0 | 8.0 | % | ISO 527-2 5 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy notched impact strength | ISO 179/1eA 6 | |||
| -30°C | 7.00 | 7.00 | kJ/m² | |
| 23°C | 11.0 | 11.0 | kJ/m² | |
| Charpy impact strength | ISO 179/1eU 7 | |||
| -30°C | 71.0 | 65.0 | kJ/m² | |
| 23°C | 67.0 | 64.0 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Vicat Softening Temperature (50°C/h, B (50N)) | 151 | -- | °C | ISO 306 8 |
| Melting Temperature 9 | 178 | -- | °C | ISO 11357-3 10 |
| CLTE - Flow | 4.0E-5 | -- | cm/cm/°C | ISO 11359-2 11 |
| Electrical | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| Relative Permittivity | IEC 60250 12 | |||
| 100 Hz | 4.00 | -- | ||
| 1 MHz | 5.00 | -- | ||
| Dissipation Factor | IEC 60250 13 | |||
| 100 Hz | 0.075 | -- | ||
| 1 MHz | 0.027 | -- |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 4 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 5 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 6 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 7 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 8 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 9 . | 10 °C/min |
| 10 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 11 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 12 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 13 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® C4940 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| FRAGOM PR/6 92 | Crosspolimeri S.p.A. | Polyolefin, Unspecified | FRAGOM |
| HANWHA LLDPE 3303 | Hanwha Chemical | LLDPE | HANWHA LLDPE |
| INEOS Wire & Cable BPD8063 | INEOS Olefins & Polymers Europe | LDPE | INEOS Wire & Cable |
| Sylvin 83033-75 Grey 9491 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
