Order Products : sales@su-jiao.com
LUBEMID A26 GF30 FR V0 NATURAL
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | LUBEN PLAST srl |
| Trademark: | LUBEMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ABWbvp_LUBEMID-A26-GF30-FR-V0-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Compound based on PA6,6 first choice natural colour. With glass fibres 30%. UL94 V0 classified. With halogens. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.54 to 1.58 | g/cm³ | ISO 1183/A |
| Water Absorption (23°C, 24 hr, 3.20 mm) | 1.4 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 7300 to 7800 | MPa | ISO 527-2/1A/1 |
| Tensile Stress | ISO 527-2/1A/5 | ||
| Yield | 115 to 125 | MPa | |
| Break | 115 to 125 | MPa | |
| Tensile Strain | ISO 527-2/1A/5 | ||
| Yield | 1.5 to 2.0 | % | |
| Break | 1.5 to 2.0 | % | |
| Flexural Modulus 1 | 6800 to 7300 | MPa | ISO 178 |
| Flexural Stress 2 | 150 to 160 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 6.0 to 7.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 30 to 40 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact | |||
| 23°C, 3.20 mm | 60 to 70 | J/m | ASTM D256A |
| 23°C 3 | 30 to 40 | kJ/m² | ASTM D256 |
| 23°C | 6.0 to 7.0 | kJ/m² | ISO 180/A |
| 23°C 4 | 6.0 to 7.0 | kJ/m² | ASTM D256 |
| Unnotched Izod Impact Strength (23°C) | 30 to 40 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, 3.20 mm | 240 to 250 | °C | ASTM D648 |
| 0.45 MPa, Unannealed | 245 to 255 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed, 3.20 mm | 230 to 240 | °C | ASTM D648 |
| Vicat Softening Temperature | |||
| -- | 240 to 250 | °C | ISO 306/A120 |
| -- | 230 to 240 | °C | ISO 306/B120 |
| Melting Temperature | 250 to 265 | °C | Internal Method |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 | |
| Glow Wire Flammability Index (2.00 mm) | 960 | °C | IEC 60695-2-12 |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 2.0 mm/min |
| 3 . | Notch E |
| 4 . | Notch A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P2760 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| THERMOLAST® K TF5BNA (Series: FC/AP) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Titacon® CL500 | Titan Plastics Compounds Co., Ltd. | Acetal (POM) Homopolymer | Titacon® |
| Generic Ionomer | Generic | Ionomer | Generic |
| Hylex® P1307L3 HB | Entec Polymers | PC | Hylex® |
