Order Products : sales@su-jiao.com
Adell Polyamide AM-10
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Adell Plastics, Inc. |
| Trademark: | Adell Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | A9fndC_Adell-Polyamide-AM-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Adell Polyamide AM-10 is a Polyamide 66 (Nylon 66) material. It is available in North America. Important attributes of Adell Polyamide AM-10 are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.1 to 1.4 | % | ASTM D955 |
| Water Absorption (24 hr) | 1.1 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | ASTM D785 | ||
| M-Scale | 85 | ||
| R-Scale | 121 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 89.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 8.0 | % | ASTM D638 |
| Flexural Modulus | 3170 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 117 | MPa | ASTM D790 |
| Compressive Strength | 103 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 37 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 196 | °C | |
| 1.8 MPa, Unannealed | 78.9 | °C | |
| Melting Temperature | 254 to 266 | °C | |
| CLTE - Flow | 7.2E-5 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.25 | W/m/K | ASTM C177 |
| RTI Elec (3.05 mm) | 105 | °C | UL 746 |
| RTI Imp (3.05 mm) | 70.0 | °C | UL 746 |
| RTI Str (3.05 mm) | 70.0 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 2.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Strength | 18 | kV/mm | ASTM D149 |
| Arc Resistance (3.05 mm) | 150 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) (3.05 mm) | 600 | V | UL 746 |
| High Amp Arc Ignition (HAI) (3.05 mm) | 120 | UL 746 | |
| High Voltage Arc Tracking Rate (HVTR) (3.05 mm) | 17.0 | mm/min | UL 746 |
| Hot-wire Ignition (HWI) (3.05 mm) | 45 | sec | UL 746 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DI-COAT E-4599 | Hapco Inc. | TP, Unspecified | DI-COAT |
| Generic Polyester Alloy | Generic | Polyester Alloy | Generic |
| Hanwha Total PP FB51 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| Sylvin 4260-65FUV Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| LNP™ THERMOCOMP™ KF006 compound | SABIC Innovative Plastics | Acetal (POM) Copolymer | LNP™ THERMOCOMP™ |
