Order Products : sales@su-jiao.com
INEOS HDPE CP53-30
| Category: | HDPE Copolymer , High Density Polyethylene Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | A5QCKD_INEOS-HDPE-CP53-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CP53-30 is a high density polyethylene copolymer developed for corrugated piping applications. This product is recommended for use in applications that are required to meet AASHTO specifications: M 294/MP 7. CP53-30 is a listed PPI Third Party Certified resin. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.35 | g/10 min | |
| 190°C/21.6 kg | 25 | g/10 min | |
| Environmental Stress-Cracking Resistance | |||
| -- 1 | > 1000 | hr | ASTM D5397 |
| 100% Igepal, F50 | > 1000 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2 | ASTM D638 | ||
| Yield | 25.5 | MPa | |
| Break | 33.8 | MPa | |
| Tensile Elongation 3 | ASTM D638 | ||
| Yield | 9.0 | % | |
| Break | > 600 | % | |
| Flexural Modulus - 2% Secant | 979 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 460 | J/m | ASTM D256 |
| Notched Izod Impact (Area) | 45.3 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 23.4 | °C | ASTM D648 |
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Vicat Softening Temperature | 125 | °C | ASTM D1525 |
| Oxidation Induction Time (210°C) | > 58 | min | ASTM D3895 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Cell Classification | 435560A | ASTM D3350 |
| Note Message | |
|---|---|
| 1 . | NCTL (Single Point) |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vipel® F282-ZZZ-00 | AOC, L.L.C. | Polyester Alloy | Vipel® |
| YUNGSOX® PP 3064 | Formosa Polypropylene | PP Impact Copolymer | YUNGSOX® PP |
| K-vinyl 70 Deg C Rating Insulation (75-Wet) | Technovinyl Polymers India Ltd. | PVC, Unspecified | K-vinyl |
| Sylvin 8707-84 Grey 9478 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| LNP™ LUBRICOMP™ DFL28EG compound | SABIC Innovative Plastics | PC | LNP™ LUBRICOMP™ |
