Order Products : sales@su-jiao.com

DuPont™ Entira™ AS MK400

Category:	Ionomer , Ionomer
Manufacturer:	DuPont Packaging & Industrial Polymers
Trademark:	DuPont™ Entira™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	A0nyhI_DuPont-Entira-AS-MK400.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Entira™ AS MK400 is an extremely hygroscopic ionomer resin that is supplied as free-flowing pellets.

Uses:

Industrial Applications

Packaging

Features

Entira™ AS MK400 is used to lower the static decay time and surface resistivity of polyolefins and other polymers.

Characteristics / Benefits:

Entira™ AS MK400 can be precompounded or dry blended into polymers for extrusion, molding, or various other processing methods

Applications:

Antistatic agent for use in films, moldings, and extruded forms.

General Information
Additive	Antistatic property
Uses	Packaging Industrial application Mixing
Agency Ratings	FDA 21 CFR 177.1330(a)
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.970	g/cm³	ASTM D792, ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.0	g/10 min	ASTM D1238, ISO 1133

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	58.9	°C	ASTM D1525, ISO 306
Melting Temperature (DSC)	91.1	°C	ASTM D3418, ISO 3146
Freezing Point - (DSC)	61	°C	ASTM D3418

Additional Information	Nominal Value	Unit
Processing Temperature - Maximum	250	°C
General Processing Information: Entira™ AS MK400 is a very hygroscopic material. To minimize exposure to moisture, any remaining material should be hermetically sealed in a barrier package immediately after use. The bag have as much air removed as possible prior to sealing. A vacuum to pull out the air can be used to assist this process. In order to reuse remaining material that has been hermetically sealed, the material should be dried under vacuum with a nitrogen flow at 50-60°C for several hours prior to use. Entira™ AS MK400 is available in pellet form for use in conventional equipment for processing polyolefins. Entira™ AS MK400 can be fed together with base polymers and other additives in the hopper during processing. Typical addition levels range from 10 - 30%.

Resin Grade	Manufacturer	Category	Trademark
Sylvin 6201-75 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
TECASINT™ 5201	Ensinger Inc.	PAI	TECASINT™
EXCELLEN® GMH CB0002	Sumitomo Chemical Asia	PE, Unspecified	EXCELLEN® GMH
Dryflex® 502400S	ELASTO	SEBS	Dryflex®
Elastron® D P.D100.A50.N	Elastron USA, Inc.	SBS	Elastron® D