Order Products : sales@su-jiao.com

NuSil CV-2900

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	A0gczA_NuSil-CV-2900.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 0.6 W/m-K, Low Temperature

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: 0.6 W/m-K, Low Temperature

General Information
Features	Low to No Outgassing Thermally Conductive
Uses	Aerospace Applications Electrical/Electronic Applications
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermal	Nominal Value	Unit	Test Method
Thermal Conductivity	0.60	W/m/K	ASTM E1530

Thermoset	Nominal Value	Unit
Tack Free Time	40.0	min

Additional Information	Nominal Value	Unit
Cure System	Oxime
Extrusion Rate	40.0	g/min

Uncured Properties	Nominal Value	Unit
Color	White
Density	2.32	g/cm³
Curing Time (23°C)	72	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	65
Tensile Strength	2.76	MPa
Tensile Elongation at Break	150	%

Resin Grade	Manufacturer	Category	Trademark
Polytron® A40N02	Polyram Ram-On Industries	Nylon 66	Polytron®
RTP PA6 50 GF BLK	RTP Company	Nylon 6	RTP
Tekuform C9	TEKUMA Kunststoff GmbH	Acetal (POM) Copolymer	Tekuform
DENILEN B 3010 CB	Vamp Tech	PP, Unspecified	DENILEN
Hifax EYC 335P C13055	LyondellBasell Industries	PP Copolymer	Hifax