Order Products : sales@su-jiao.com
Shinko-Lac® ASA TW20
| Category: | ASA , Acrylonitrile Styrene Acrylate |
| Manufacturer: | Mitsubishi Rayon America Inc. |
| Trademark: | Shinko-Lac® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | A0GCI9_Shinko-Lac-ASA-TW20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Shinko-Lac® ASA TW20 is an Acrylonitrile Styrene Acrylate (ASA) material. It is available in North America for injection molding. Primary attribute of Shinko-Lac® ASA TW20: Heat Resistant. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/5.0 kg) | 0.30 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 104 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 43.1 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 2260 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 66.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 150 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.35 mm, Injection Molded | 111 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm, Injection Molded | 98.0 | °C | |
| Vicat Softening Temperature | 112 | °C | ISO 306/B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Zeoforte® ZSC 4195CX | Zeon Chemicals L.P. | NBR | Zeoforte® |
| Novalloy-B B27B3 (Type M) | Daicel Polymer Ltd. | ABS+PBT | Novalloy-B |
| APEX® 84131 | Teknor Apex Company | PVC, Flexible | APEX® |
| PMC® 746 | Smooth-On, Inc | PUR, Unspecified | PMC® |
| PENTALLOY BP H natural | PENTAC Polymer GmbH | Nylon 6+PP | PENTALLOY BP |
