| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | A0DbtK_Andur-95-AP.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| Andur 95-AP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 95 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, and by the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 800 | cP | ASTM D2393 |
| 100°C | 440 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 6 to 6.4%Specific Gravity, ASTM D792, 77°F: 1.075 g/mlSpecific Gravity, ASTM D792, 212°F: 1.04 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Estane® 58300 TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyether | Estane® |
| DURACON® NW-02LV | Polyplastics Co., Ltd. | Acetal (POM) Copolymer+PE | DURACON® |
| Hanwha Total PP BJ800 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP Impact Copolymer | Hanwha Total PP |
| Iupilon® GSH2040KR | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| Kepital® FB2025 | KEP Americas | Acetal (POM) Copolymer | Kepital® |