Order Products : sales@su-jiao.com
PLUSTEK RA303G3
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Polyram Ram-On Industries |
| Trademark: | PLUSTEK |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9znn6O_PLUSTEK-RA303G3.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 15% GLASS FIBER REINFORCED HEAT STABILIZED AND HYDROLYSIS RESISTANT POLYAMIDE 66 FOR INJECTION MOLDING APPLICATIONS. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792, ISO 1183 |
| Molding Shrinkage | |||
| Flow | 0.40 - 0.50 | % | ASTM D955 |
| -- | 0.40 - 0.50 | % | ISO 2577 |
| Water Absorption | |||
| Saturation | 0.90 | % | ASTM D570 |
| Saturated, 23°C | 0.90 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | > 100 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Break) | > 3.0 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | > 4000 | MPa | ASTM D790, ISO 178 |
| Flexural Strength | > 155 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | > 50 | J/m | ASTM D256 |
| 23°C | > 4.5 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | > 200 | °C | ASTM D648, ISO 75-2/B |
| 1.8 MPa, not annealed | > 180 | °C | ASTM D648, ISO 75-2/A |
| Melting Temperature | 256 | °C | ISO 11357-3, ASTM D3418 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85.0 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Moisture | 0.15 | % | |
| Rear Temperature | 270 - 280 | °C | |
| Middle Temperature | 280 - 300 | °C | |
| Front Temperature | 285 - 310 | °C | |
| Mold Temperature | 65.0 - 110 | °C | |
| Injection Pressure | 70.0 - 125 | MPa | |
| Injection Rate | Fast | ||
| Holding Pressure | 35.0 - 85.0 | MPa | |
| Back Pressure | 0.350 - 0.700 | MPa | |
| Screw Speed | 60 - 90 | rpm |
| Injection instructions |
|---|
| Fill Speed: 50 to 75 mm/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TPUCO® TPUE-UE80 | Taiwan PU Corporation | TPU-Polyester | TPUCO® |
| Witcom TPE 2006/562 | Witcom Engineering Plastics B.V. | TPE | Witcom TPE |
| Eastar™ MB002 | Eastman Chemical Company | Copolyester | Eastar™ |
| Eastar™ BR203 | Eastman Chemical Company | Copolyester | Eastar™ |
| Lupoy® 1200-22 | LG Chem Ltd. | PC | Lupoy® |
