Order Products : sales@su-jiao.com
REPOL® D080MN
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | REPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9yFCbm_REPOL-D080MN.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
REPOL Polypropylene D080MN is manufactured using Unipol PP process, which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific catalyst system. Repol D080MN is recommended for use in Injection Moulded processes where high rigidity and impact strength are required. It is an ideal material for compounding, automotive components, luggage etc. Repol D080MN contains nucleating agent for good stiffness. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 6.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1280 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 170 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 105 | °C | ASTM D648 |
| Additional Information |
|---|
| The values listed were tested in accordance with ASTM D4101 |
| Note Message | |
|---|---|
| 1 . | Type 1, 50mm/min |
| 2 . | Type 1, 50mm/min |
| 3 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAMID® 66 GF 50 H TS | A. Schulman Europe | Nylon 66 | SCHULAMID® |
| Ultramid® 8202 | BASF Corporation | Nylon 6 | Ultramid® |
| DIC.PPS FZ-3600-H5 | DIC Corporation | PPS | DIC.PPS |
| Flontech® FT-EK20-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Sylvin 9077-88 Grey 9462 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
