Order Products : sales@su-jiao.com
Corton® PDR 1623 HS
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | PolyPacific Pty. Ltd. |
| Trademark: | Corton® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9yEbzq_Corton-PDR-1623-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Corton PDR 1623 HS is a 20% mica filled homopolymer polypropylene compound. It is a high flow injection moulding grade developed for rigid components requiring maximum rigidity good weld line strength and dimensional stability. It is stabilized to meet automotive heat ageing requirements (21 days at 150°C). |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 16 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.00 mm) | 0.90 to 1.3 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 3.00 mm) | 113 | ASTM D785 | |
| Durometer Hardness | ASTM D2240 | ||
| Shore D, 3.00 mm | 80 | ||
| Shore D, 15 sec, 3.00 mm | 74 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(3.00 mm) | 42.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 3.00 mm) | 5.0 | % | ASTM D638 |
| Flexural Modulus (3.00 mm) | 3600 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.00 mm) | 19 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.00 mm) | 190 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.00 mm | 146 | °C | |
| 1.8 MPa, Unannealed, 3.00 mm | 90.0 | °C | |
| CLTE - Flow (-30 to 30°C, 3.00 mm) | 5.0E-5 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 to 120 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Suggested Max Regrind | 10 | % | |
| Processing (Melt) Temp | 200 to 260 | °C | |
| Mold Temperature | 20.0 to 60.0 | °C | |
| Injection Rate | Moderate-Fast |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| APEX® 92-A2370B-75 | Teknor Apex Company | PVC, Flexible | APEX® |
| Celstran® PA66-GF20-02P11/12 | Celanese Corporation | Nylon 66 | Celstran® |
| CONTINUUM鈩?DMDD-6620 HEALTH+鈩?Datasheet | The Dow Chemical Company | HDPE | CONTINUUM™ |
| ECO-FLEX™ SA-75A | SYNESIS LLC | RTPV | ECO-FLEX™ |
| Sylvin 2974-50 White 1484 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
