Order Products : sales@su-jiao.com
Axiall PVC 3014
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | Axiall Corporation |
| Trademark: | Axiall PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9rhinZ_Axiall-PVC-3014.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Georgia Gulf 3014 is a base for use of wood flour up to 40 percent. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.38 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 1200433 | ASTM D4216 | |
| PVC Cell Classification | 12444 | ASTM D1784 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2620 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 48.3 | MPa | ASTM D638 |
| Flexural Modulus | 3100 | MPa | ASTM D790 |
| Flexural Strength | 82.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 64 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 65.6 | °C | ASTM D648 |
| CLTE - Flow | 6.8E-5 | cm/cm/°C | ASTM D696 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 163 - 168 | °C | |
| Cylinder Zone 2 Temp. | 163 - 168 | °C | |
| Cylinder Zone 3 Temp. | 163 - 168 | °C | |
| Cylinder Zone 4 Temp. | 163 - 168 | °C | |
| Cylinder Zone 5 Temp. | 163 - 168 | °C | |
| Melt Temperature | 185 - 193 | °C | |
| Die Temperature | 168 - 182 | °C |
| Extrusion instructions |
|---|
| Melt Pressure: 2000 psiBreaker Plate: RingUp to 40% Wood Flour Size 40 to 80 MeshDry to <8% moisture in flour. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® S RV300 100 NAT | Radici Plastics | Nylon 6 | Radilon® |
| Sekisui PVC HA-24K | Sekisui (Hong Kong) Limited | PVC, Unspecified | Sekisui PVC |
| Trademark PE mLLD1916B | Trademark Plastics Corporation | mLLDPE | Trademark PE |
| 陶氏低密度聚乙烯 615C | The Dow Chemical Company | LDPE | DOW™ LDPE |
| HiFill® PA6 0254 B | Techmer Engineered Solutions | Nylon 6 | HiFill® |
