Order Products : sales@su-jiao.com
Edgetek™ PC-20GF/000 Phi Gray 6
| Category: | PC , Polycarbonate |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Edgetek™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9qlo7X_EdgetekPC20GF000PhiGray6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 20% glass fiber reinforced polycarbonate compound |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.34 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.20 - 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(23°C, 3.20 mm) | 100 | MPa | ASTM D638 |
| Flexural Modulus 2(23°C, 3.20 mm) | 6000 | MPa | ASTM D790 |
| Flexural Strength 3(23°C, 3.20 mm) | 160 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm) | 70 | J/m | ASTM D256 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.0 mm) | V-1 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 130 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Processing (Melt) Temp | 280 - 300 | °C | |
| Mold Temperature | 60 - 110 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mapex A00200FN | Ginar Technology Co., LTD. | Nylon 66 | Mapex |
| TAROMID B 280 G5 | Taro Plast S.p.A. | Nylon 6 | TAROMID B |
| NEMCON H PC DP113/X5 | Ovation Polymers Inc. | PC | NEMCON H |
| Fiberfil® M-2494 BK | Fiberfil® Engineered Plastics Inc. | Nylon, Unspecified | Fiberfil® |
| Garaflex™ E 89-086-C3 NAT NF LCF-R | AlphaGary | TPE | Garaflex™ E |
