Order Products : sales@su-jiao.com
Moharamplast MDPE MP-IRR 3810
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Moharamplast S.A.E |
| Trademark: | Moharamplast MDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9qIe3X_Moharamplast-MDPE-MP-IRR-3810.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A medium density polyethylene (MDPE) compound designed to provide excellent corrosion resistance, chemical resistance, abrasion resistance, stiffness and environmental stress crack resistance (ESCR). It is UV stabilized, protected from oxidation, microorganisms and fungi attack and has Low temperature resistance so remains intact and undamaged even after freezing. Safety MP-IRR 3810 is classified as no-dangerous material. We advise you to follow our safety guidelines and recommendations in our Material Safety Data Sheet. Typical Applications MP-IRR3810 is resistant to saline water, acids and alkaline solutions (excluding highly concentrated solutions) so mainly used in agricultural irrigation systems, water delivery systems, sprinkler and micro-sprinkler stands, assembly dripper sets and automation application. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 0.938 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal) | > 1000 | hr | ASTM D1693 |
| Carbon Black Content | > 2.2 | % | ASTM D1603 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 62 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 24.0 | MPa | |
| Break | 28.0 | MPa | |
| Tensile Elongation (Break) | > 700 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | > 115 | °C | ASTM D1525 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 to 210 | °C | |
| Cylinder Zone 3 Temp. | 190 to 210 | °C | |
| Cylinder Zone 5 Temp. | 190 to 210 | °C | |
| Melt Temperature | 200 to 220 | °C | |
| Head Temperature | 200 to 210 | °C | |
| Die Temperature | 200 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starflam R10002E | Eurostar Engineering Plastics | Nylon 66/6 | Starflam |
| Trexlink™ 4750 | Mitsubishi Chemical Performance Polymers, Inc. | TPE | Trexlink™ |
| Infino NH-3208GL | SAMSUNG SDI CO., LTD. | PC | Infino |
| LGH 306 | LG Polymers India Pvt. Ltd. | PS (HIPS) | LGH |
| LUVOCOM® 1301-8305 | Lehmann & Voss & Co. | PPS, Linear | LUVOCOM® |
