Order Products : sales@su-jiao.com
HYPERIER® IP1306B
| Category: | Nylon, Unspecified , Polyamide |
| Manufacturer: | LG Chem Ltd. |
| Trademark: | HYPERIER® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9pbfpZ_HYPERIER-IP1306B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description Barrier thermoplastic, Nylon blend with HDPE Application Agrochemical Container,SORE* Fuel Tank, PFC |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 to 0.40 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 3.20 mm) | 260 | % | ASTM D638 |
| Flexural Modulus 3(6.40 mm) | 836 | MPa | ASTM D790 |
| Flexural Strength 4(6.40 mm) | 31.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C, 6.40 mm | 67 | J/m | |
| 23°C, 6.40 mm | 640 | J/m |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Blow Molding Barrel Temperature | 175 to 215 | °C | |
| Blow Molding Die Temperature | 175 to 215 | °C | |
| Blow Molding Melt Temperature | 200 to 230 | °C | |
| Blow Molding Mold Temperature | 30 to 50 | °C | |
| Drying Temperature - Blow Molding 5 | 80 to 90 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Minimum Moisture Content - Blow Molding | < 0.010 | % | |
| Screw Speed - Blow Molding | 10 to 50 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 10 mm/min |
| 4 . | 10 mm/min |
| 5 . | 3 to 4 hours |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnamid® T-27 GF 45 | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| FORMEX® GK-62 | ITW FORMEX | PP, Unspecified | FORMEX® |
| LENTICULAR® 60LPI | Polycasa | PETG | LENTICULAR® |
| Lupol® EI5002 | LG Chem Ltd. | TPO | Lupol® |
| Dryflex® SE 40A201 | ELASTO | TPE | Dryflex® |
