Order Products : sales@su-jiao.com
MEGOLON™ HF 8030 NATURAL
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | AlphaGary |
| Trademark: | MEGOLON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9o9yke_MEGOLON-HF-8030-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A 90°C RATED, ZERO HALOGEN INSULATION COMPOUND INTENDED FOR COMMUNICATION CABLES. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 - 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 2.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 54 - 60 | ASTM D2240 | |
| Shaw D, 15 seconds | 45 - 51 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (0.762 mm) | 13.1 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 600 | % | ASTM D412 |
| Tear Strength (Split) | 18 | kN/m | ASTM D470 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1(121°C, 168 hr) | -5.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2(121°C, 168 hr) | -10 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -40.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant | ASTM D150 | ||
| 23°C, 1 MHz | 2.70 | ASTM D150 | |
| 23°C, 100 MHz | 2.75 | ASTM D150 | |
| 23°C, 1.00 GHz | 2.60 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 23°C, 1 MHz | 9.0E-4 | ASTM D150 | |
| 23°C, 100 MHz | 4.0E-4 | ASTM D150 | |
| 23°C, 1.00 GHz | 3.0E-4 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 28 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 154 | °C | |
| Cylinder Zone 2 Temp. | 166 | °C | |
| Cylinder Zone 3 Temp. | 171 | °C | |
| Cylinder Zone 4 Temp. | 177 | °C | |
| Cylinder Zone 5 Temp. | 182 | °C | |
| Adapter Temperature | 182 | °C | |
| Melt Temperature | 177 - 188 | °C | |
| Die Temperature | 182 | °C | |
| Extruder Screw Compression Ratio | 3.5:1 |
| Extrusion instructions |
|---|
| Maddocks mixing screwBarrier mixing screw |
| Note Message | |
|---|---|
| 1 . | Thickness: 30 mil |
| 2 . | Thickness: 30 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PA1212 Reinforced Nylon 1212 | Shandong Guangyin New Materials Co., Ltd. | Nylon 1212 | Shandong PA1212 |
| Delrin® 900P NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| Di-Pak™ E-4566 | Hapco Inc. | TP, Unspecified | Di-Pak™ |
| Karina IVORY PVC COMPOUND 105900-35/1 1-B-ACE | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| Sylvin 8481-70 Clear 876 | Sylvin Technologies Incorporated | PVC+PUR | Sylvin |
