Order Products : sales@su-jiao.com
LNP™ STAT-LOY™ PF303 compound
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | LNP™ STAT-LOY™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9ivggG_LNP-STAT-LOY-PF303-compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP STAT-LOY PF303 is a Nylon 6 base resin containing 15% Glass Fiber. Added features of this grade includes: Antistat. Also known as: LNP* STAT-LOY* Compound PF-15 Product reorder name: PF303 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.25 | g/cm³ | ASTM D792 |
| -- | 1.24 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 24 hr | 0.50 to 0.70 | % | |
| Across Flow : 24 hr | 0.90 to 2.0 | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 6.6 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 5620 | MPa | ASTM D638 |
| -- | 4750 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Yield 2 | 82.0 | MPa | ASTM D638 |
| Yield | 72.0 | MPa | ISO 527-2/5 |
| Break 3 | 74.0 | MPa | ASTM D638 |
| Break | 68.0 | MPa | ISO 527-2/5 |
| Tensile Elongation | |||
| Yield 4 | 2.3 | % | ASTM D638 |
| Yield | 2.4 | % | ISO 527-2/5 |
| Break 5 | 2.4 | % | ASTM D638 |
| Break | 2.8 | % | ISO 527-2/5 |
| Flexural Modulus | |||
| 50.0 mm Span 6 | 4250 | MPa | ASTM D790 |
| -- 7 | 4260 | MPa | ISO 178 |
| Flexural Stress | |||
| -- | 103 | MPa | ISO 178 |
| Yield, 50.0 mm Span 8 | 121 | MPa | ASTM D790 |
| Break, 50.0 mm Span 9 | 120 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 93 | J/m | ASTM D256 |
| 23°C 10 | 9.3 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 750 | J/m | ASTM D4812 |
| 23°C 11 | 44 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact | |||
| 23°C, Total Energy | 10.5 | J | ASTM D3763 |
| -- | 2.90 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, 3.20 mm | 207 | °C | ASTM D648 |
| 0.45 MPa, Unannealed, 64.0 mm Span 12 | 204 | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed, 3.20 mm | 188 | °C | ASTM D648 |
| 1.8 MPa, Unannealed, 64.0 mm Span 13 | 181 | °C | ISO 75-2/Af |
| CLTE | ASTM D696 | ||
| Flow : -30 to 30°C | 3.1E-5 | cm/cm/°C | |
| Transverse : -30 to 30°C | 1.4E-4 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 9.0 to 11 | ohms | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.15 to 0.25 | % | |
| Rear Temperature | 249 to 260 | °C | |
| Middle Temperature | 266 to 277 | °C | |
| Front Temperature | 277 to 288 | °C | |
| Processing (Melt) Temp | 266 to 277 | °C | |
| Mold Temperature | 82.2 to 93.3 | °C | |
| Back Pressure | 0.344 to 0.689 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | Type I, 5.0 mm/min |
| 3 . | Type I, 5.0 mm/min |
| 4 . | Type I, 5.0 mm/min |
| 5 . | Type I, 5.0 mm/min |
| 6 . | 1.3 mm/min |
| 7 . | 2.0 mm/min |
| 8 . | 1.3 mm/min |
| 9 . | 1.3 mm/min |
| 10 . | 80*10*4 |
| 11 . | 80*10*4 |
| 12 . | 80*10*4 mm |
| 13 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PA1212 A1VS01 | Shandong Dongchen Engineering Plastics Co., Ltd. | Nylon 1212 | Shandong PA1212 |
| TechnoFin GF30-22 | TechnoCompound GmbH | PP, Unspecified | TechnoFin |
| Spartech Polycom SC5-3230 | Spartech Polycom | PP Homopolymer | Spartech |
| BESTNYL SI20CI01AHQ03 | Triesa Plastics | Nylon 6 | BESTNYL |
| Sylvin 8225-80 White 1468 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
