Order Products : sales@su-jiao.com
K-Guard HFFR 771
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Technovinyl Polymers India Ltd. |
| Trademark: | K-Guard |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9id9eA_K-Guard-HFFR-771.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
K-Guard HFFR 771 is a Polyolefin material. It is available in Africa & Middle East. Important attributes of K-Guard HFFR 771 are:
Typical application of K-Guard HFFR 771: Wire & Cable |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.51 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (160°C/21.6 kg) | 5.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 48 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus - 2% Secant | 300 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 10.8 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 210 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 168 hr) | 12 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (100°C, 168 hr) | -22 | % | ASTM D573 |
| Change in Tensile Strength (60°C, 168 hr, in IRM 902 Oil) | -11 | % | ASTM D471 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -48.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance 3 | 5500 | Mohms/1000 ft | ASTM D470 |
| Insulation Resistance Constant - K-Value 4 | 19000 | ASTM D470 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Release | ASTM E1354 | ||
| Average | 84 | kW/m² | |
| Peak | 128 | kW/m² |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Knife Test (90°C) 5 | Pass | IEC 540 | |
| Specific Extinction Area | 216000 | m²/kg | ASTM E1354 |
| Time to Ignition | 2.8 | min | ASTM E1354 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 34 | % | ASTM D2863 |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| 3 . | Immersed in water for 16 hrs |
| 4 . | Immersed in water for 16 hrs |
| 5 . | 4 hrs, % penetration, Clause 8 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trithene® TS 7006 | Petroquimica Triunfo | LDPE | Trithene® |
| FRblend® PP-1303 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PP, Unspecified | FRblend® |
| Hifax TRC 412P | LyondellBasell Industries | PP Alloy | Hifax |
| IPC PP 4840H-C | International Polymers Corporation | PP Homopolymer | IPC PP |
| Latistat 36/MR-04 | LATI S.p.A. | ABS | Latistat |
