Order Products : sales@su-jiao.com
CONATHANE® EN-2553
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | CONATHANE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 9iVWTV_CONATHANE-EN-2553.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CONATHANE EN-2553 is a filled, two-component polyurethane system designed for use as a potting and encapsulating material for electronic components where critical thermal cycling characteristics are a factor. CONATHANE EN-2553 has excellent electrical properties, low shrinkage, low stress build-up and can be hand mixed or machine dispensed. This RoHS compliant system has been tested according to UL test criteria and has obtained UL 94 V-0 & RTI 120 °C standards. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 1.24 | g/cm³ | |
| -- 2 | 1.49 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 95 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 7.24 | MPa | |
| Tensile Elongation (Break) | 60 | % | |
| Tear Strength | 24.7 | kN/m |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 3.5E+15 | ohms | |
| Volume Resistivity | 3.1E+14 | ohms·cm | |
| Dielectric Strength | 22 | kV/mm | |
| Dielectric Constant (1 kHz) | 4.20 | ||
| Dissipation Factor (1 kHz) | 0.17 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (6.00 mm) | V-0 | UL 94 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 100 | ||
| Resin | Mix Ratio by Weight: 17 | ||
| Thermoset Mix Viscosity (25°C) | 4500 | cP |
| Note Message | |
|---|---|
| 1 . | Resin |
| 2 . | Hardener |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RONFALIN® ST65 | A. Schulman Europe | ABS | RONFALIN® |
| Tecomid® NA40 NL IH | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| Cevian®-V 660SF | PlastxWorld Inc. | ABS | Cevian®-V |
| EPLAMID 66 GFS 20 HS NC | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 66 | EPLAMID 66 |
| OP - PEI 30GF | Oxford Polymers | PEI | OP - PEI |
